British Aerospace Hawk T.1A

Wallpaper Description

The BAE Systems Hawk is a British single-engine, advanced jet trainer aircraft.

It was first flown at Dunsfold, Surrey, in 1974 as the Hawker Siddeley Hawk, and subsequently produced by its successor companies, British Aerospace and BAE Systems, respectively.

It has been used in a training capacity and as a low-cost combat aircraft.

Operators of the Hawk include the Royal Air Force (notably the Red Arrows display team) and a considerable number of foreign military operators.

The Hawk is still in production in the UK and under licence in India by Hindustan Aeronautics Limited (HAL) with over 900 Hawks sold to 18 operators around the world.

General characteristics

Crew: 2: student, instructor
Length: 12.43 m (40 ft 9 in)
Wingspan: 9.94 m (32 ft 7 in)
Height: 3.98 m (13 ft 1 in)
Wing area: 16.70 m2 (179.64 ft2)
Empty weight: 4,480 kg (9,880 lb)
Useful load: 3,000 kg (6,600 lb)
Max takeoff weight: 9,100 kg (20,000 lb)

Powerplant: 1× Rolls-Royce Adour Mk. 951 turbofan with FADEC, 29 kN (6,500 lbf) 29 kN

Performance

Maximum speed: Mach 0.84 (1,028 km/h, 638 mph) at altitude
Range: 2,520 km (1,360 NM, 1,565 mi)
Service ceiling: 13,565 m (44,500 ft)
Rate of climb: 47 m/s (9,300 ft/min)
Thrust/weight: 0.65

Armament

Note: all armament is optional.
1× 30 mm ADEN cannon, in centreline pod
Up to 6,800 lb (3,085 kg) of weapons on five hardpoints, including:
4× AIM-9 Sidewinder or ASRAAM on wing pylons and wingtip rails
1,500 lb (680 kg), limited to one centreline and two wing pylons (Hawk T1)

Download British Aerospace Hawk T.1A

Advanced Download Options

Standard (4:3)

Widescreen (16:9)

Widescreen (16:10)

Original

British Aerospace Hawk T.1A - combat, trainer

Uploaded:

Uploaded by woody2858

Level 29

Member since June 2013

0 Comments

Write first. Your draft stays in this browser while you sign in to post.

No comments yet. Be the first to start the conversation.